Section 1: General
1.1 The Riverside International Speedway will adopt the rules of the National Modified Midget Association (NMMA) "M" Class. The rules set forth herein are designed to provide for the orderly conduct of racing events. These rules shall govern the conditions of all events, and by participating in these events, all participants are deemed to have complied with these rules. These rules are intended as a guide for the conduct of the event and are in no way a guarantee against injury or death to a participant, spectator or official. The Race Director shall be empowered to permit reasonable deviation from any specification that in his opinion does not alter the acceptable requirements, and does not provide an appreciable speed or competitive advantage. The decision of the officials is final. The current NMMA rule book is the final authority.
1.2 Drivers age 14 and up may compete in the 600 Sprint Class.
1.3 All cars must have legible numbers painted in contrasting colors on both sides of car and the nose.
Minimum height of numbers is 8" on the nose and nose wing, 10" on each side of the tail and 12" on the wing. Numbers must be separated from advertising so they will be readable.
1.4 No gold or silver leaf or prismatic numbers will be allowed on the cars.
Section 2: Safety
2.1 Seat belts must be securely attached to the car and used at all times. Metal to metal latches only. 5 point seat belts, shoulder harness and sub strap are required. Belt dates must not be over three years old. (Example: Oct 06 may be used in 2007,2008 and 2009.)
2.2 Arm restraints are mandatory and must be adequately adjusted to keep the drivers hands below the top of the roll cage.
2.3 Helmets must be full head coverage competition type and one of the three latest SNELL approvals.
2.4 All drivers will wear a name brand flame-retardant uniform.
2.5 Neck braces, cage nets and/or head and neck restraints are mandatory.
2.6 SFI gloves are mandatory for safety.
Section3: Bodies
3.1 All cars must have complete bodies.
3.2 Tail sections must be in place for time trials and all races.
3.3 Body of car must be made of aluminum, metal, fiberglass or high impact plastic.
3.4 No rear view mirrors.
3.5 The only part of the car allowed to be dismantled for driver to enter or exit is a quick release steering wheel hub.
3.6 All mechanically operated devices must be mounted below the driver's shoulders for safety.
3.7 Wings are mandatory. Minimum 12" tall car number must be displayed on side board. All wings must have a minimum 1/16" radius, no raw edges. No exposed wood or wood products to be used in the wing. The rib and spar within the center section (airfoil) may have wood products. Wings cannot be more than 4 niches below top of roll cage in any wing position. In case of a rollover, car can run the night without a wing if a backup is not available. It is recommended for top wings to be pinned for easy removal in case of driver injury. If a nose wing is used, it must be installed so as not to obstruct the driver's vision. The nose wing must carry the same car number as the body nose.
3.8 Cars may run maximum twelve (12) square feet top wing. Sideboard max 54" long by max 26" wide.
